>> 模型介绍 | Model Introduction >>>>>>>>| > 灵感来源 Source of Inspiration 最近换了一个叫温致的HNB，与IUO最大的区别就是多了一个能装滤芯的嘴。所以做了一个小盒子来装这些小滤芯。🤣 I recently switched to a HNB device called Wenzhi. The biggest difference from IUO is that it comes with an additional mouthpiece that can hold filter cartridges. That’s why I designed this small box to store these tiny filters. | > 见仁见智 Multifaceted Perspectives 是否适用于其他场景，请根据模型规格自行判断。 Suitability for
>> 模型介绍 | Model Introduction >>>>>>>>| > 灵感来源 Source of Inspiration 今天做了一个滤水盒子，打完后发现它像一个体育馆的微缩建筑模型，它主要是放置那个洗完锅后湿漉漉的钢丝球的。🤣 Today I made a water-filtering box. After printing, I realized it looks like a miniature architectural model of a stadium! Its main purpose is to hold the wet steel wool scrubber used after washing pots. 🤣 | > 见仁见智 Multifaceted Perspectives 是否适用于其他场景，请根据模型规格自行判断。 Suitability for additional applications
>> 模型介绍 | Model Introduction >>>>>>>>| > 灵感来源 Source of Inspiration 虽然分子筛干燥剂除湿效果非常好，但是单单靠CFS底部的两个干燥剂存放盒的剂量只能将湿度降到20°左右，毕竟所处在南方，只好再为CFS做个额外干燥剂放置盒子。现在的湿度稳稳的保持在了5°，盒子可存放最小2.5mm的颗粒，两个效果更佳，可放置在CFS线材后边的长矩形空隙处。 While molecular sieve desiccants deliver excellent dehumidification performance, the quantity of desiccant in the two storage boxes at the bottom of the CFS alone can only reduce the humidity to around 20% (relative humidity). After all,
>> 模型介绍 | Model Introduction >>>>>>>>昨天收到指示，家里的领导想要一个收纳耳钉耳环的盒子，还要带个盖子。好吧，那就简单做一个哈。 Yesterday, I received instructions from the household leader that she wants a box for storing earrings, one that comes with a lid. Well, it seems straightforward enough; I'll just make a simple one.物件整体 Overall Design of the Object: X:195mm; Y:91.3mm; Z:66.1mm.类别 CategoryXYZ盖子 Cover195mm91.3mm41.1mm盒子 Container195mm91.3mm56.5mm插销 Pin5.1mm5.1mm55mm插销冒 Pin Cap5.1mm5.1mm2mm壁厚 Wa
>> 模型介绍 | Model Introduction >>>>>>>>可以用来装固体香膏或者合适大小的香炉香薰瓶子，当然也可以用来做茶杯底座，其实本来我就只是想做个茶壶茶杯底座的，但是想到PETG不耐高温，所以对外分享肯定是以香薰的名义了。This can be used to hold solid perfume or suitably sized aroma oil bottles or incense burners. Of course, it can also serve as a base for teacups. Initially, I only intended to make a base for teapots and teacups, but considering that PETG is not heat-resistant, I decided to share it externally under the guise of an aromat
xiao3
了解详情...
