>> 模型介绍 | Model Introduction >>>>>>>>
昨天收到指示，家里的领导想要一个收纳耳钉耳环的盒子，还要带个盖子。好吧，那就简单做一个哈。
Yesterday, I received instructions from the household leader that she wants a box for storing earrings, one that comes with a lid. Well, it seems straightforward enough; I'll just make a simple one.
物件整体 Overall Design of the Object: X:195mm; Y:91.3mm; Z:66.1mm.
| 类别 Category | X | Y | Z |
|---|---|---|---|
| 盖子 Cover | 195mm | 91.3mm | 41.1mm |
| 盒子 Container | 195mm | 91.3mm | 56.5mm |
| 插销 Pin | 5.1mm | 5.1mm | 55mm |
| 插销冒 Pin Cap | 5.1mm | 5.1mm | 2mm |
| 壁厚 Wall Thickness | 5mm | 5mm | 3mm |
| 大格子 Large Compartment | 65mm | 75mm | - |
| 小格子1 Small Compartment 1 | 28.5mm | 36.5mm | 40mm |
| 小格子2 Small Compartment 2 | 28.5mm | 36.5mm | 20mm |
>> 打印配置 | Print Settings >>>>>>>>
（仅参考，可自定义）
(Referential, Customizable as Needed)
耗材 Filament：PLA
填充 Infill：15%
填充图案 Infill Pattern：网格 Grid
支撑 Support：不需要 Not Required
Brim/Raft: NONE
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，简单组装。
Ready to use upon installation; simple assembly required.
如果插销不好打印可用M3*55mm螺丝替代。
If the pin is difficult to print, you can use an M3 x 55mm screw as a substitute.
>> 其他说明 | Additional Notes >>>>>>>>
1. 模型使用 Blender 4.2.5LTS制作。
2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
3. 无论如何，遇见是缘分，能用是巧合，留个言点个赞，关注收藏一起浪。
1. The model was created using Blender 4.2.5 LTS.
2. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
3. Anyway, meeting is fate, being able to use it is coincidence. Leave a comment, give a like, follow and save, and let's ride this wave together.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
MakerOnline（纵维立方）
>> 实物购买 | Physical Purchase >>>>>>>>
