>> 模型介绍 | Model Introduction >>>>>>>>
回南天，玻璃上都是水雾，为了方便清除，所以弄了这个小工具。当然，也是为了方便在汽车玻璃上使用。由于平台板太小，做不了一体打印件，只能拆分了。对了，清理玻璃的时候记得用布把面板包上哈。🤣
During the humid season, glass surfaces tend to fog up with moisture. To make cleaning easier, this small tool was created. It’s also convenient for use on car windows. Because the print bed is too small to print the entire piece as one unit, it had to be split into multiple parts. By the way, remember to wrap the panel with a cloth when cleaning the glass.
| 面板 Panel | 把手 Handle | 插销 Latch |
|---|---|---|
| X：80mm | X：194mm | X：4.6mm |
| Y：80mm | Y：25.4mm | Y：4.6mm |
| Z：17.1mm | Z：17.6mm | Z：35mm |
>> 打印配置 | Print Settings >>>>>>>>
（仅参考，可自定义）
(Referential, Customizable as Needed)
耗材 Filament：PETG
填充 Infill：15%
填充图案 Infill Pattern：网格 Grid
支撑 Support：不需要 Not Required
Brim/Raft: 仅外侧 Outer side only
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，简单组装；
Ready to use upon installation; simple assembly required.
>> 其他说明 | Additional Notes >>>>>>>>
模型使用 Blender 4.2.5LTS制作。
已生成并上传STL，可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
The model was created using Blender 4.2.5 LTS
The STL file has been generated and uploaded. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
MakerOnline（纵维立方）
>> 实物购买 | Physical Purchase >>>>>>>>
