>> 模型介绍 | Model Introduction >>>>>>>>
今天家里买了个新菜板，刚好缺了一个放置架，所以动手造了一个。
We recently bought a new cutting board and realized we were missing a stand for it. So, I decided to get creative and made one myself.
- 底座 | Base -
长(X)：150mm
宽(Y)：150mm
高(Z)：15mm
面倾斜 Inclined face：6.5°
- 隔山 | Partition -
长(X)：150mm
宽(Y)：40mm
高(Z)：120mm
双斜面 Double bevel：27°
>> 打印配置 | Print Settings >>>>>>>>
（仅参考，可自定义）
(Referential, Customizable as Needed)
耗材 Filament：PETG
填充 Infill：15%
填充图案 Infill Pattern：网格 Grid
支撑 Support：不需要 Not Required
Brim/Raft: None
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装。
Print and Use Immediately; No Assembly Required.
>> 其他说明 | Additional Notes >>>>>>>>
模型使用 Blender 4.2.5LTS制作。
已生成并上传STL，可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
The model was created using Blender 4.2.5 LTS
The STL file has been generated and uploaded. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
MakerOnline（纵维立方）
>> 实物购买 | Physical Purchase >>>>>>>>
