>> 模型介绍 | Model Introduction >>>>>>>>
可以用来装固体香膏或者合适大小的香炉香薰瓶子，当然也可以用来做茶杯底座，其实本来我就只是想做个茶壶茶杯底座的，但是想到PETG不耐高温，所以对外分享肯定是以香薰的名义了。
This can be used to hold solid perfume or suitably sized aroma oil bottles or incense burners. Of course, it can also serve as a base for teacups. Initially, I only intended to make a base for teapots and teacups, but considering that PETG is not heat-resistant, I decided to share it externally under the guise of an aromatherapy accessory.
- 盒子（整体）| Overall -
长 (X)：100mm
宽 (Y)：100mm
高 (Z)：42mm
- 容量（内盒）| Capacity -
长 (X)：96.8mm
宽 (Y)：96.8mm
高 (Z)：27mm
>> 打印配置 | Print Settings >>>>>>>>
（仅参考，可自定义）
(Referential, Customizable as Needed)
耗材 Filament：PETG
填充 Infill：15%
填充图案 Infill Pattern：网格 Grid
支撑 Support：不需要 Not Required
Brim/Raft: None
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装；
Print and Use Immediately; No Assembly Required；
>> 其他说明 | Additional Notes >>>>>>>>
模型使用 Blender 4.2.5LTS制作。
已生成并上传STL，可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
The model was created using Blender 4.2.5 LTS
The STL file has been generated and uploaded. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
MakerOnline（纵维立方）
>> 实物购买 | Physical Purchase >>>>>>>>
