>> 模型介绍 | Model Introduction >>>>>>>>
配备三绿S4干燥箱的都知道，它兼容3公斤的料盘，所以它对于1公斤的料盘顶部会留出很大的间隙。用过干燥箱或者AMS的同志都应该知道间隙太大有时会因料盘轻微压线导致料盘整个被拖拉起飞或者倾斜，一旦料盘倾斜会导致原本轻微的压线变成严重的卡线，增加炒面拉丝甚至堵头的风险，所以给它加了个套套。
这个是针对彩格PETG料盘，全网搜只搜到R3D料盘尺寸的套套，还只是针对AMS的，所以只好自己动手造了，毕竟手上现在只有创想三维和彩格的料盘。
哦，对了，创新三维的料盘不能套哈，因为它比彩格的料盘大了2mm。
Anyone who has used the SUNLU S4 Drying Box knows that it is compatible with 3-kilogram Filament. Therefore, when using a 1-kilogram Filament, there is a significant gap at the top. Users of Drying Box or Automatic Material Systems (AMS) should be aware that too large a gap can sometimes cause the Filament to be slightly pressed against the line, leading to the entire Filament being dragged up or tilted. Once the Filament tilts, what starts as a slight press against the line can become a severe jam, increasing the risk of filament tangling or even blockage. To address this issue, I created an extension set for the CHG PETG Filament. After searching online, I only found extension sets designed for R3D Filament and specifically for AMS, so I had to make one myself. Currently, I only have Creality and CHG Filament on hand. Oh, by the way, the Creality Filament cannot use this extension set because it is 2mm larger than the CHG Filament.
- 扩展套 Expansion Sleeve -
长 (X)：207mm
宽 (Y)：207mm
高 (Z)：7mm
>> 打印配置 | Print Settings >>>>>>>>
（仅参考，可自定义）
(Referential, Customizable as Needed)
耗材 Filament：PETG
填充 Infill：15%
填充图案 Infill Pattern：网格 Grid
支撑 Support：需要 Required
Brim/Raft: None
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装；
Print and Use Immediately; No Assembly Required；
>> 其他说明 | Additional Notes >>>>>>>>
模型使用 Blender 4.2.5LTS制作。
已生成并上传STL，可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
The model was created using Blender 4.2.5 LTS
The STL file has been generated and uploaded. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
MakerOnline（纵维立方）
>> 实物购买 | Physical Purchase >>>>>>>>
