>> 模型介绍 | Model Introduction >>>>>>>>
天气冷了，拆掉增高架，盖上盖子更好的保温打印，所以就做个可叠层的工具盒放工具。
With the weather getting colder, removing the height-increasing stand and covering with a lid provides better thermal insulation for printing. Therefore, I decided to make a stackable tool box to store tools.
- 整盒 Overall -
长 (X)：158mm
宽 (Y)：128mm
高 (Z)：36mm
- 内盒 Capacity -
长 (X)：150mm
宽 (Y)：120mm
高 (Z)：35mm
>> 打印配置 | Print Settings >>>>>>>>
（仅参考，可自定义）
(Referential, Customizable as Needed)
耗材 Filament：PETG
填充 Infill：15%
填充图案 Infill Pattern：网格 Grid
支撑 Support：需要 Not Required
Brim/Raft: None
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装；
Print and Use Immediately; No Assembly Required；
>> 其他说明 | Additional Notes >>>>>>>>
模型使用 Blender 4.2.5LTS制作。
已生成并上传STL，可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
The model was created using Blender 4.2.5 LTS
The STL file has been generated and uploaded. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
MakerOnline（纵维立方）
>> 实物购买 | Physical Purchase >>>>>>>>
