>> 模型介绍 | Model Introduction >>>>>>>>
原本是想测试做一个M3的螺丝和螺母的，可惜螺纹做的不怎么好，索性将它放大做成了个手指解压玩具，也顺便测试一下两个物件间有个0.1mm间隔是否能直接打印成活动件。
当然，毕竟是解压小玩具，柱体做了凹凸纹理，有个磨手效果，还是挺舒服的。
Originally, I intended to test by making an M3 screw and nut. Unfortunately, the threads didn't turn out very well, so I decided to enlarge it and make it into a finger stress-relief toy, while also testing whether a 0.1mm gap between two parts can be directly printed as a moving component.
Of course, since it’s a small stress-relief toy, I added a textured pattern with raised and recessed areas on the cylinder for a satisfying tactile sensation—it feels quite comfortable to handle.
- 螺柱 Stud -
长 (Y)：25mm
宽 (X)：25mm
高 (Z)：40mm
- 螺帽 Nut -
长 (Y)：40mm
宽 (X)：35mm
高 (Z)：8mm
>> 打印配置 | Print Settings >>>>>>>>
（仅参考，可自定义）
(Referential, Customizable as Needed)
耗材 Filament：PETG
填充 Infill：15%
填充图案 Infill Pattern：网格 Grid
支撑 Support：不需要 Not Required
Brim/Raft: None
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装；
Print and Use Immediately; No Assembly Required；
>> 其他说明 | Additional Notes >>>>>>>>
模型使用 Blender 4.2.5LTS制作。
已生成并上传STL，可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
The model was created using Blender 4.2.5 LTS
The STL file has been generated and uploaded. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
MakerOnline（纵维立方）
>> 实物购买 | Physical Purchase >>>>>>>>
