>> 模型介绍 | Model Introduction >>>>>>>>
第一次拿着游标卡尺实测后自行建模的小物件
This is the first time I've created a 3D model of a small object after measuring it precisely with a vernier caliper.
T5 LED灯管为：长1170mm×宽24.1mm×高34.9mm
支架的内卡槽为：长30mm×宽24.4mm×高16.2mm
- Dimensions of the T5 LED Tube -
Length: 1170mm
Width: 24.1mm
Height: 34.9mm
- Dimensions of the Bracket's Internal Slot -
Length: 30mm
Width: 24.4mm
Height: 16.2mm
>> 打印配置 | Print Settings >>>>>>>>
（仅参考，可自定义）
(Referential, Customizable as Needed)
耗材 Filament：PETG
填充 Infill：15%
填充图案 Infill Pattern：网格 Grid
支撑 Support：需要 Required
Brim/Raft: None
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装；
Print and Use Immediately; No Assembly Required.
>> 其他说明 | Additional Notes >>>>>>>>
模型使用 Blender 4.2.5LTS制作。
已生成并上传STL，可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
The model was created using Blender 4.2.5 LTS
The STL file has been generated and uploaded. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
>> 实物购买 | Physical Purchase >>>>>>>>
