>> 模型介绍 | Model Introduction >>>>>>>>
让大疆RC-N1遥控器支持挂载平板。
理论上支持所有同等大小的平板，已添加源模型文件，请根据需求打印相应大小物件。
源模型为支持iPad Pro (2018版) ，所以稍加做了改动：
1.对原模型做了三角拉力支撑点；
2.修改支架长度以便支持对小一寸的平板挂载，最大化适配包括iPad之外的更多平板。
3.更小的平板，如iPad mini大小的平板请自行根据需要修改模型的长度；
This design theoretically supports all tablets of similar size. The original model files are included, allowing you to print the object in the appropriate size according to your requirements.
Modifications Made:
1.Triangular Tension Support Points: Added triangular tension support points to enhance stability.
2.Adjusted Bracket Length: Modified the bracket length to accommodate slightly smaller tablets, ensuring broader compatibility with various tablet models, not limited to iPads.
3.Customization for Smaller Tablets: For smaller tablets, such as those similar in size to the iPad mini, users may need to adjust the model length accordingly.
>> 打印配置 | Print Settings >>>>>>>>
（仅参考，可自定义）
(Referential, Customizable as Needed)
耗材 Filament：PETG
填充 Infill：15%
填充图案 Infill Pattern：网格 Grid
支撑 Support：需要 Required
Brim/Raft: None
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装；
Print and Use Immediately; No Assembly Required；
>> 其他说明 | Additional Notes >>>>>>>>
模型使用 Blender 4.2.5LTS制作。
已生成并上传STL，可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
The model was created using Blender 4.2.5 LTS
The STL file has been generated and uploaded. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
MakerOnline（纵维立方）
>> 实物购买 | Physical Purchase >>>>>>>>
