3D模型 | 3D Model 分类 - 动力原

香薰盒子 | Scented Oil Diffuser Box

>> 模型介绍 | Model Introduction >>>>>>>>可以用来装固体香膏或者合适大小的香炉香薰瓶子，当然也可以用来做茶杯底座，其实本来我就只是想做个茶壶茶杯底座的，但是想到PETG不耐高温，所以对外分享肯定是以香薰的名义了。This can be used to hold solid perfume or suitably sized aroma oil bottles or incense burners. Of course, it can also serve as a base for teacups. Initially, I only intended to make a base for teapots and teacups, but considering that PETG is not heat-resistant, I decided to share it externally under the guise of an aromathera

3D模型 | 3D Model · 01-03 · 113 人浏览

三绿S4干燥箱配件之彩格料盘扩展套 | SUNLU S4 Drying Box Accessory - CHG Filament Extension

>> 模型介绍 | Model Introduction >>>>>>>>配备三绿S4干燥箱的都知道，它兼容3公斤的料盘，所以它对于1公斤的料盘顶部会留出很大的间隙。用过干燥箱或者AMS的同志都应该知道间隙太大有时会因料盘轻微压线导致料盘整个被拖拉起飞或者倾斜，一旦料盘倾斜会导致原本轻微的压线变成严重的卡线，增加炒面拉丝甚至堵头的风险，所以给它加了个套套。这个是针对彩格PETG料盘，全网搜只搜到R3D料盘尺寸的套套，还只是针对AMS的，所以只好自己动手造了，毕竟手上现在只有创想三维和彩格的料盘。哦，对了，创新三维的料盘不能套哈，因为它比彩格的料盘大了2mm。Anyone who has used the SUNLU S4 Drying Box knows that it is compatible with 3-kilogram Filament. Therefore, when using a 1-kilogram Filament, there is a significant ga

3D模型 | 3D Model · 01-02 · 107 人浏览

洞洞板之格子间办公桌配件 | Pegboard Accessories for Cubicle Desks

>> 模型介绍 | Model Introduction >>>>>>>>继上次的物件架，心心念念要搞个配套洞洞板，趁着2024年最后一天动动手造一造哈。After making the storage rack last time, I've had it in mind to create a matching pegboard. So, on the last day of 2024, I took the chance to roll up my sleeves and give it a go. -&n

3D模型 | 3D Model · 2024-12-31 · 112 人浏览

带盖盒子 | lidded box

>> 模型介绍 | Model Introduction >>>>>>>>给盒子加个盖子，防尘美观哈。Adding a lid to the box would help keep it dust-free and look nicer.- 全盒（含墙厚）Overall - 长 (X)：158mm 宽 (Y)：128mm 高 (Z)：40mm- 盒内（容量）Capacity - 长 (X)：150mm 宽 (Y)：120mm 高 (Z)：40mm>> 打印配置 | Print Settings >>>>>>>>（仅参考，可自

3D模型 | 3D Model · 2024-12-29 · 96 人浏览

衣柜钥匙挂钩 | Wardrobe key hook

>> 模型介绍 | Model Introduction >>>>>>>>衣柜多边形，多给造几个挂钩来挂钥匙等小物件，将空间极致利用。The wardrobe is polygonal; add several more hooks for hanging keys and other small items to maximize the use of space.>> 打印配置 | Print Settings >>>>>>>>（仅参考，可自定义）(Referential, Customizable as Needed)耗材 Filament：PET

3D模型 | 3D Model · 2024-12-28 · 90 人浏览

电转支架 | Electric conversion bracket

>> 模型介绍 | Model Introduction >>>>>>>>常用工具要摆在台面才能显示出专业嘛。Doesn't it show professionalism to keep commonly used tools on the countertop?- 整体 Overall - 长 (X)：49mm 宽 (Y)：99mm 高 (Z)：115mm 半径(R):22mm>> 打印配置 | Print Settings >>>>>>>>（仅参考，可自定义）(Referential, Customizable as Needed)耗材 Filament：PETG填充 Infill：15%填充图案 Infill Pattern：网格&n

3D模型 | 3D Model · 2024-12-26 · 78 人浏览

层叠工具盒 | Stackable tool box

>> 模型介绍 | Model Introduction >>>>>>>>天气冷了，拆掉增高架，盖上盖子更好的保温打印，所以就做个可叠层的工具盒放工具。With the weather getting colder, removing the height-increasing stand and covering with a lid provides better thermal insulation for printing. Therefore, I decided to make a stackable tool box to store tools. - 整盒 Overall - 长 (X)：158mm 宽 (Y)：128mm 高 (Z)：36mm - 内盒 Capacity - 长 (X)：150mm 宽 (Y)：120m

3D模型 | 3D Model · 2024-12-25 · 91 人浏览

财神小玩具摆件底座 | Base for a Caishen toy figurine

>> 模型介绍 | Model Introduction >>>>>>>>给在拼多多买的小玩具加个小底座。Add a small base to the toy I bought on Pinduoduo. - 底座 Pedestal - 长 (X)：105mm 宽 (Y)：80mm 高 (Z)：80mm - 圆柱 Cylindrical Column - 长 (X)：14mm 宽 (Y)：14mm 高 (Z)：3mm - 方柱 Square Column - 长 (X)：8.1mm 宽 (Y)：5mm 高 (Z)：10.4mm

3D模型 | 3D Model · 2024-12-16 · 80 人浏览

晾鞋架 | Shoe airer

>> 模型介绍 | Model Introduction >>>>>>>>鞋子嘛，容易滋生细菌，不洗就会引起脚臭。Shoes tend to breed bacteria easily, and not cleaning them can lead to foot odor. - 挂钩 Hook - 长 (X)：49.5mm 宽 (Y)：23.5mm 高 (Z)：33.5mm - 整体 Overall - 长 (X)：180mm 宽 (Y)：24.5mm 高 (Z)：190mm>> 打印配置 | Print Settings &

3D模型 | 3D Model · 2024-12-11 · 88 人浏览

小米随身蓝牙音箱火箭型支架 | Xiaomi Portable Bluetooth Speaker rocket-shaped stand

>> 模型介绍 | Model Introduction >>>>>>>>随着长12成功发射，身为海南文昌人，抬头就能看火箭发射的我，有了想做火箭模型的冲动。当然，得拿家里闲置的小物件先试手。刚好有个小米随身蓝牙音箱（第一代），所以做了个火箭造型，加了两个助推器，哈哈哈，目前这个成品不是现役箭型哈。先把火箭箭身做好，之后再加整流罩了。With the successful launch of the Long March 12, as a resident of Wenchang, Hainan, I often get to witness rocket launches firsthand. This experience has sparked my desire to build a rocket model. Naturally, I plan to start with some idle small items I have at home. Fortunately, I

3D模型 | 3D Model · 2024-12-03 · 134 人浏览

红米27寸显示器T5灯管背挂支架 | Redmi 27-inch monitor T5 tube back-mounting bracket

>> 模型介绍 | Model Introduction >>>>>>>>针对家里的红米27寸显示器做的T5灯管背挂支架。A T5 tube back-mounting bracket made specifically for the Redmi 27-inch monitor at home.- 支架 Bracket -长 (X)：103mm宽 (Y)：20mm高 (Z)：103mm- 钩长（内）Hook -长 (X)：7.8mm宽 (Y)：20mm高 (Z)：2mm>> 打印配置 | Print Settings >>>>>>>>（仅参考，可自定义）(Referential,&

3D模型 | 3D Model · 2024-11-30 · 72 人浏览

书架挂钩 | Bookshelf hook

>> 模型介绍 | Model Introduction >>>>>>>>针对家里的书架做的挂钩。A hook made specifically for the bookshelf at home.- 挂钩（全）Overall -长 (X)：50.25mm宽 (Y)：40.5mm高 (Z)：99mm- 挂钩（内）Inner Hook -长 (X)：25mm宽 (Y)：10mm高 (Z)：90mm- 钩长 Hook Length -1.5mm>> 打印配置 | Print Settings >>>>>>>>（仅参考，可自定义）(Referential, Customizable as

3D模型 | 3D Model · 2024-11-19 · 79 人浏览

格子间办公桌格栏物件架 | Cubicle desk organizer with grid compartments

>> 模型介绍 | Model Introduction >>>>>>>>能最大化的利用办公桌的空间，当然最主要是能摆放一些小物件来衬托一下打工人在办公室应有的氛围。Designed to maximize the use of desk space, this organizer primarily aims to accommodate small items that enhance the atmosphere and productivity of a desk worker in the office environment. - 平面 Flat Surface - X：200mm Y：75mm Z：8mm - 支撑(内) Support -X：45mmY：10mmZ：33mm- 插销 Pin -X：5mmY：5mmZ：18.5mm>>

3D模型 | 3D Model · 2024-11-18 · 79 人浏览

手指转转螺母 | Finger spinner nut

>> 模型介绍 | Model Introduction >>>>>>>>原本是想测试做一个M3的螺丝和螺母的，可惜螺纹做的不怎么好，索性将它放大做成了个手指解压玩具，也顺便测试一下两个物件间有个0.1mm间隔是否能直接打印成活动件。当然，毕竟是解压小玩具，柱体做了凹凸纹理，有个磨手效果，还是挺舒服的。Originally, I intended to test by making an M3 screw and nut. Unfortunately, the threads didn't turn out very well, so I decided to enlarge it and make it into a finger stress-relief toy, while also testing whether a 0.1mm gap between two parts can be directly printed as a moving component.Of cour

3D模型 | 3D Model · 2024-11-11 · 72 人浏览

收纳盒 | Storage box

>> 模型介绍 | Model Introduction >>>>>>>>长 (Y)：120mm宽 (X)：100mm高 (Z)：55mm>> 打印配置 | Print Settings >>>>>>>>（仅参考，可自定义）(Referential, Customizable as Needed)耗材 Filament：PETG填充 Infill：15% 填充图案 Infill Pattern：网格 Grid支撑 Support：不需要 Not RequiredBrim/Raft: None>> 组装说明 | Assembly Instructions >>>>>

3D模型 | 3D Model · 2024-11-05 · 82 人浏览