>> 模型介绍 | Model Introduction >>>>>>>>
| > 灵感来源 Source of Inspiration
家里的领导说了，单单饰品盒子已经装满了不够用了，想要一个能亮出来，挂起来方便天天换的东西，所以再次做了是挂钩，一排过去想挂多少就打多少。
My Partner Said the Jewelry Box at Home Is Already Full and Not Enough—They Want Something to Display Jewelry and Hang It up for Easy Daily Changes. So I Made Hooks Again: Arrange Them in a Row, and Print as Many as You Want to Hang.
| > 见仁见智 Multifaceted Perspectives
是否适用于其他场景，请根据模型规格自行判断。
Suitability for additional applications should be self-assessed based on the model specifications.
| > 模型规格 Model Specifications
详细规格请参阅下载页的打印配置说明。
For detailed specifications, refer to the print configuration description on the download page.
>> 切片设置 | Slice Settings >>>>>>>>
| > 仅供参考，按需调整 For reference only; Customize as needed
| 耗材 Filament：PETG
| 层高 Layer Height
> 层高 Layer height：0.2mm
> 首层层高 First layer height：0.2mm
| 墙壁和表面 Walls and surfaces
> 墙顺序 Walls printing order：外墙/内墙 Outer/Inner
| 墙 Walls
> 墙层数 Wall loops：2
| 填充 Infill
> 稀疏填充密度 Sparse infill density：15%
> 稀疏填充图案 Sparse infill pattern：网格 Grid
| 支撑 Support
> 开启支撑 Enable support：不需要 Not Required
| 轮廓圈 Skirt
> 轮廓圈类型 Skirt type：组合 Combined
> 轮廓圈数 Skirt loops：1
| 裙边 Brim
> 裙边类型 Brim type：仅外侧 Outer brim only
> 裙边宽度 Brim width：5mm
> 裙边与模型的间隙 Brim-object gap：0.08mm
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装。
Print-Ready / Assembly-Free
>> 其他说明 | Additional Notes >>>>>>>>
1. 模型使用 Blender 4.4.3制作。
The model was created using Blender 4.4.3.
2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.
3. 无论如何，遇见是缘分，适用是幸会。百因必有果，结果就是遇到我，欢迎点赞加收藏，感谢关注和助力。
Regardless, our meeting is serendipity; its value to you, a fortunate encounter. Every cause yields effect—your joy starts with meeting me! Likes and favorites are appreciated; thanks for follows and boosting.
4.本篇英文翻译出自于DeepSeek。
This English translation is powered by DeepSeek.
>> 模型下载 | Model Download >>>>>>>>
CrealityCloud（创想云）
MakerWorld（拓竹）
MakerOnline（纵维立方）
>> 实物购买 | Physical Purchase >>>>>>>>
