>> 模型介绍 | Model Introduction >>>>>>>>
| > 灵感来源 Source of Inspiration
趁着春节来临之际，做一个随处拍的相框，灵感来自于 MagicRelief 。
With the Spring Festival approaching, I’ve created a portable photo frame, inspired by MagicRelief.
| > 见仁见智 Multifaceted Perspectives
是否适用于其他场景，请根据模型规格自行判断。
Suitability for additional applications should be self-assessed based on the model specifications.
| > 模型规格 Model Specifications
| 模型编号 3DModel ID：0221913
| 1号模型详细规格 Model No.1 - Detailed Specifications
> ┻ ┗ 86.00mm × 72.00mm × 4.00mm
| 2号模型详细规格 Model No.2 - Detailed Specifications
> ┻ ┗ 86.00mm × 72.00mm × 3.95mm
>> 切片设置 | Slice Settings >>>>>>>>
| > 仅供参考，按需调整 For reference only; Customize as needed
| 耗材 Filament：PLA
| 层高 Layer Height
> 层高 Layer height：0.2mm
> 首层层高 First layer height：0.4mm
| 线宽 Line width
> 首层 First layer：0.5
> 外墙 Outer wall：0.5
| 接缝 Seam
> 接缝位置 Seam position：对齐 Aligned
| 墙生成器 Wall generator
> 墙生成器 Wall generator：Arachne
> 最小特征尺寸 Minimum feature size：15%
| 墙壁和表面 Walls and surfaces
> 墙顺序 Walls printing order：外墙/内墙 Outer/Inner
| 墙 Walls
> 墙层数 Wall loops：2
| 填充 Infill
> 稀疏填充密度 Sparse infill density：15%
> 稀疏填充图案 Sparse infill pattern：网格 Grid
| 其他层速度 Other layers speed
> 外墙 Outer wall：60mm/s
> 内墙 Inner wall：120mm/s
| 悬垂速度 Overhang speed
> 悬垂降速 Slow down for overhangs：开 ON
> 悬垂速度 Overhang speed： 0/25/13/5
| 筏层 Raft：无 NONE
| 轮廓圈 Skirt
> 轮廓圈类型 Skirt type：组合 Combined
> 轮廓圈数 Skirt loops：1
>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装。
Print-Ready / Assembly-Free
>> 其他说明 | Additional Notes >>>>>>>>
1. 模型使用 Blender 4.5.2 LTS制作。
The model was created using Blender 4.5.2 LTS.
2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
You are free to modify it to your desired style as needed under the CC BY-NC-SA 4.0 license.
3. 无论如何，遇见是缘分，适用是幸会。欢迎点赞或收藏，感谢关注和助力。
Regardless, it’s serendipity to meet, and a delight to be useful. Likes, favorites, follows, and support are all greatly appreciated!
4. 百因必有果，打印不好别找我。即便同一设备，在不同的打印速度、切片设置、线材类型以及所处环境潮湿度都会对成品的质量、品质、效果造成影响。
Every cause has its effect—please note that I assume no responsibility for printing failures. Even with the same equipment, factors like printing speed, slicing settings, filament type, and ambient humidity can all affect the quality and performance of the finished product.
5. 所有成品在日常使用中都存在风险，请定期检查成品耐久，及时对成品进行更新，以免造成不必要的损失。
Risks may arise in the daily use of all finished products. Please regularly check their durability and replace or upgrade them in a timely manner to avoid unnecessary losses.
6. 鉴于模型社区的开放、包容和共享性质，为了避免引起不必要的纠纷，本人仅对“作者”标识的打印配置阐释说明。
Given the open, inclusive, and sharing nature of the model community, to avoid unnecessary disputes, I only provide explanations for the print configurations marked with the "Author" label.
7. 本篇英文翻译出自于豆包AI。
This English translation is powered by DouBao AI.
>> 模型下载 | Model Download >>>>>>>>
>> 实物购买 | Physical Purchase >>>>>>>>
